CP2110
Features
- Flow control options:
- Hardware (CTS / RTS)
- No flow control
- Data formats supported:
- Data bits: 5, 6, 7, and 8
- Stop bits: 1, 1.5, and 2
- Parity: odd, even, mark, space, no parity
- Baud rates: 300 bps to 1 Mbps
- 480 Byte receive and transmit buffers
- RS-485 mode with bus transceiver control
- Line break transmission
GPIO Interface Features
- 10 GPIO pins with configurable options
- Usable as inputs, open-drain or push-pull outputs
- Configurable clock output for external devices
- 24 MHz to 47 k Hz
- RS-485 bus transceiver control
- Toggle LED upon transmission
- Toggle LED upon reception
Ordering Part Numbers
- CP2110-F01-GM (QFN24, 4 x 4 mm, Pb-free)
- CP2110-F02-GM1 (QFN28, 5 x 5 mm, Pb-free)
- QFN28 is pin-patible with the CP2102-GM.
Temperature Range:
- 40 to +85 °C
Rev. 1.3 11/21
Figure 1. Example System Diagram
Copyright © 2021 by Silicon Laboratories
Rev. 1.3
TABLE OF CONTENTS
Section
Page
1. System Overview
- . . ....
